| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Signed to Unsigned Conversion Error and Out-of-bounds Write vulnerability in Erlang OTP erts allows an attacker who can supply a crafted Erlang external term format (ETF) binary to binary_to_term/1 to corrupt the BEAM heap pointer and crash the virtual machine.
When decoding a LARGE_TUPLE_EXT term, the validation pass decoded_size() in erts/emulator/beam/external.c reads the 32-bit arity field as unsigned (get_uint32()), while the decode pass dec_term() reads the same field as a signed 32-bit integer (get_int32()) into an int. An arity wire value of 0x80000000 passes validation as 2147483648 but decodes as -2147483648, so the subsequent hp += n moves the heap allocation pointer backward. Neither pass enforces the runtime tuple-arity limit MAX_ARITYVAL. The result is an out-of-bounds heap write; in practice the VM detects an impossible heap size and aborts, denying service. The required padding is large when uncompressed but the compressed-ETF envelope shrinks it to a small payload on the wire.
This issue affects OTP from OTP 25.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to erts from 13.0 before 17.0.4, 16.4.0.4 and 15.2.7.11. |
| Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name.
When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service.
The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}.
This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups.
This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to megaco from 3.17.1 before 4.9.1, 4.8.3.1 and 4.7.2.2. Versions prior to OTP 17.0 are also affected but are not listed because the OTP version scheme is only defined from OTP 17.0 onwards. |
| Heap-based buffer overflow in the SOHM list-index deserialization code in HDF5 through 2.1.1 on all platforms allows attackers to cause a denial of service (crash) via a crafted HDF5 file whose shared-message list index declares a num_messages count exceeding list_max, triggering out-of-bounds heap reads and writes in H5SM__cache_list_deserialize and H5SM__cache_list_verify_chksum. |
| Illustrator is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Illustrator is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Illustrator is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Multiple security vulnerabilities in Snowflake libsnowflakeclient versions prior to 2.9.2 could allow remote code execution and credential exfiltration. A stack-based buffer overflow in the file download path could allow remote code execution on a victim host. An attacker could exploit this by uploading a file with a crafted encryption metadata field to a shared internal stage that a victim process later downloads, and impact would be limited to deployments where principals with different privilege levels share the same internal stage. A related out-of-bounds write in the same download path could allow memory corruption with attacker-controlled write primitives. An attacker may exploit this through a crafted initialization vector metadata field on a shared stage, and impact would be limited by the same stage-write precondition. Improper validation of connection parameters could allow an attacker-controlled input to redirect outbound authentication requests — including credentials and tokens — to an attacker-controlled endpoint. Impact is limited to embedding deployments where a lower-privileged principal can influence connection configuration while higher-privileged service credentials are in use. The fix is available in Snowflake libsnowflakeclient version 2.9.2. The Snowflake PHP PDO Driver and Snowflake ODBC Driver embed the affected library; fixes are available in versions 4.1.0 and 3.19.0 respectively. Users must manually upgrade. |
| An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| Out of bounds write in ANGLE in Google Chrome prior to 150.0.7871.182 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in Codecs in Google Chrome prior to 150.0.7871.186 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - reject an oversized device packet size
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. A concrete inner array with a different max_entries
value can then replace the template.
After a successful outer map lookup, the verifier represents the
resulting map pointer using the inner map template. Const-key lookup
nullness elision consequently uses the template max_entries even though
the runtime helper uses the concrete inner map max_entries.
Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP,
because the template max_entries does not prove that the key is in bounds
for the concrete runtime map. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB write in HT_caps_handler()
HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.
Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid calling post_write_mst_fixup() for invalid index_block
ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write()
returns an error, intending to restore the buffer after a failed write.
However, ntfs_ib_write() returns an error immediately if
pre_write_mst_fixup() validation fails. The caller,
ntfs_icx_ib_sync_write(), interprets any error as a write failure
requiring rollback. It does not differentiate between I/O errors and
validation failures, and calls post_write_mst_fixup() anyway.
Since post_write_mst_fixup() assumes that the index_block contents is
correct, it doesn't perform the boundary checks, which results in
out-of-bounds memory access.
An attacker can craft a malicious NTFS image with:
- large index_block.usa_ofs offset, pointing outside the ntfs_record
- index_block.usa_count = 0, causing integer underflow
- or index_block.usa_count larger than actual number of sectors in the
ntfs_record, causing out-of-bounds access
KASAN reports describing the memory corruption:
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0
Read of size 2 at addr ffff8881586c9018 by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x19c/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x19c/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x19c/0x1d0
post_write_mst_fixup+0x19c/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0
Write of size 2 at addr ffff8881586c91fe by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x1aa/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x1aa/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x1aa/0x1d0
post_write_mst_fixup+0x1aa/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
Let's move the post_write_mst_fixup() call to ntfs_ib_write().
The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning.
If the index_block contents is invalid, pre_write_mst_fixup() fails and
ntfs_ib_write() returns early without calling post_write_mst_fixup() on
bad index_block. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate BTF repeated field counts before expansion
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate RSA CRT component lengths
The generic RSA key parser (rsa_helper.c) bounds each CRT component (p,
q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt()
allocates half-size DMA buffers (key_sz / 2) and right-aligns each
component with:
memcpy(dst + half_key_sz - len, src, len)
When a CRT component is larger than half_key_sz the subtraction
underflows and memcpy writes past the DMA buffer, causing memory
corruption.
Add a len > half_key_sz check next to the existing !len check for each
of the five CRT components so the driver falls back to the non-CRT path
instead of writing out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: bound Read Response placement to the RREAD length
In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each
inbound Read Response DDP segment at sge->laddr + wqe->processed and then
accumulates wqe->processed, but it never checks the running total against
the sink buffer length on continuation segments. siw_check_sge() resolves
and validates the sink memory only on the first fragment (the if (!*mem)
branch), and siw_rresp_check_ntoh() compares the cumulative length against
wqe->bytes only on the final segment (the !frx->more_ddp_segs guard).
A connected siw peer that answers an outstanding RREAD with Read Response
segments that keep the DDP Last flag clear, carrying more total payload
than the RREAD requested, drives wqe->processed past the validated sink
buffer; the next siw_rx_data() call writes out of bounds at
sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP,
so the peer is the remote end of an established RDMA connection and needs
no local privilege.
Bound every segment before placement, exactly as siw_proc_send() and
siw_proc_write() already do for their tagged and untagged paths, and
terminate the connection with a base-or-bounds DDP error when the
Read Response would overrun the sink buffer.
This is the second receive-path length fix for this file. A separate
change rejects an MPA FPDU length that underflows the per-fragment
remainder in the header decode; that guard does not cover this case,
because here each individual segment length is self-consistent and only
the accumulated placement offset overruns the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| Out of bounds write in ANGLE in Google Chrome on Mac prior to 150.0.7871.46 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
