| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Validate SVID index in svdm_consume_modes()
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. A concrete inner array with a different max_entries
value can then replace the template.
After a successful outer map lookup, the verifier represents the
resulting map pointer using the inner map template. Const-key lookup
nullness elision consequently uses the template max_entries even though
the runtime helper uses the concrete inner map max_entries.
Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP,
because the template max_entries does not prove that the key is in bounds
for the concrete runtime map. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Skip VF Resizable BAR restore on read error
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek: Fix IRQ domain leak when port fails to enable
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port
from pcie->ports and frees the port structure. However, the IRQ domains set
up earlier by mtk_pcie_init_irq_domain() are never freed.
Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,
mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when
mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in
the probe error path (during resume, child devices may have active MSI
mappings and the NOIRQ context prohibits sleeping locks),
mtk_pcie_enable_port() is changed to return an error code so callers can
distinguish the two paths and act accordingly.
This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC
support series. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry
matching the bw_bits value read from the chip:
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
break;
}
*val = bmg160_samp_freq_table[i].filter;
If no entry matches, i ends up equal to the array size and the next line
reads one slot past the end. bmg160_set_filter() has the same shape, driven
by 'val' instead of bw_bits.
smatch flags both:
drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
Return -EINVAL when no entry matches.
The set_filter() path is reachable from userspace via the sysfs
in_anglvel_filter_low_pass_3db_frequency interface, so userspace can
trivially trigger the out-of-bounds read with a value that is not in
bmg160_samp_freq_table[].filter. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: restrict implied bcc[0] exemption to responses without data area
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Prevent out-of-bounds read in glob matching
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config
swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but
the boundary check uses "> 4" instead of ">= 4", allowing index 4 to
cause an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
snd_seq_event_dup() copies an incoming event into a pool cell and, in
the UMP-enabled build, clears the trailing cell->ump.raw.extra word that
the memcpy() did not cover. The guard deciding whether to clear it
compares the copied size against sizeof(cell->event):
memcpy(&cell->ump, event, size);
if (size < sizeof(cell->event))
cell->ump.raw.extra = 0;
For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) ==
sizeof(cell->event), so the condition is false and the extra word keeps
stale data. The cell pool is allocated with kvmalloc() (not zeroed) and
cells are reused via a free list, so that word holds uninitialised heap
or leftover event data.
When such a cell is delivered to a UMP client (client->midi_version > 0)
that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it
unconverted -- snd_seq_read() reads it out as the larger struct
snd_seq_ump_event and copies the stale word to user space, a 4-byte
kernel heap infoleak to an unprivileged /dev/snd/seq client.
Compare against sizeof(cell->ump) instead, so the trailing word is zeroed
for every event shorter than the UMP cell. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: validate count before reading Status Update VDO
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: igorplugusb: heed coherency rules
In a control request, the USB request structure
can be subject to DMA on some HCs. Hence it must obey
the rules for DMA coherency. Allocate it separately. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuidle: Skip governor when only one idle state is available
On certain platforms (PowerNV systems without a power-mgt DT node),
cpuidle may register only a single idle state. In cases where that
single state is a polling state (state 0), the ladder governor may
incorrectly treat state 1 as the first usable state and pass an
out-of-bounds index. This can lead to a NULL enter callback being
invoked, ultimately resulting in a system crash.
[ 13.342636] cpuidle-powernv : Only Snooze is available
[ 13.351854] Faulting instruction address: 0x00000000
[ 13.376489] NIP [0000000000000000] 0x0
[ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668
Fix this by adding a bail-out in cpuidle_select() that returns state 0
directly when state_count <= 1, bypassing the governor and keeping the
tick running. |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4). SmartVNC has an out-of-bounds memory access vulnerability that could be triggered on the client side when sending data from the server, which could result in a Denial-of-Service condition. |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4). SmartVNC has an out-of-bounds memory access vulnerability that could be triggered on the server side when sending data from the client, which could result in a Denial-of-Service condition. |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has an out-of-bounds memory access vulnerability in the device layout handler, represented by a binary data stream on client side, which can potentially result in code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Limit PTP to a single page
Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256
playback streams, but the additional pages are not used by the card
correctly. The CT20K2 hardware already has multiple VMEM_PTPAL
registers, but using them separately would require refactoring the
entire virtual memory allocation logic.
ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of
CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When
aggregate memory allocations exceed this limit, ct_vm_map() tries to
access beyond the allocated space and causes a page fault:
BUG: unable to handle page fault for address: ffffd4ae8a10a000
Oops: Oops: 0002 [#1] SMP PTI
RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi]
Call Trace:
atc_pcm_playback_prepare+0x225/0x3b0
ct_pcm_playback_prepare+0x38/0x60
snd_pcm_do_prepare+0x2f/0x50
snd_pcm_action_single+0x36/0x90
snd_pcm_action_nonatomic+0xbf/0xd0
snd_pcm_ioctl+0x28/0x40
__x64_sys_ioctl+0x97/0xe0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count
remain unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
