| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Validation of Specified Quantity in Input vulnerability in WPDeveloper Better Payment – Instant Payments, Donations, Fundraising with Subscriptions & More better-payment allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Better Payment – Instant Payments, Donations, Fundraising with Subscriptions & More: from n/a through <= 2.2.0. |
| An Improper Validation of Specified Quantity in Input vulnerability in the TCP proxy plugin of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial of Service (DoS).
When TCP proxy is engaged in a flow session, to support ALGs, Advanced Anti-Malware, ICAP or UTM, a TCP packet with specifically malformed TCP header will cause flow processing daemon (flowd) to crash and restart. This causes a complete service outage until the system has automatically recovered.
This issue affects Junos OS on MX with SPC3, and SRX Series:
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2.
This issue does not affect releases before 23.4R1. |
| An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered.
Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE).
When this issue happens the following logs can be observed:
fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default
fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, the toc plugin and TableOfContents directive generate heading IDs as predictable toc_N values without slugifying the heading text, allowing attacker-controlled id="toc_N" content to collide with generated anchors and redirect same-page navigation, CSS selectors, or JavaScript handlers. This issue is fixed in version 3.3.0. |
| Immutable.js provides many Persistent Immutable data structures. Prior to 4.3.9 and 5.1.8, List#set, List#setSize, List#setIn, List#updateIn, and the functional set, setIn, and updateIn mishandle an index or size in the range 2 ** 30 to 2 ** 31 in setListBounds in src/List.js, causing an empty List to enter an uncatchable infinite loop, a populated List to allocate without bound until process abort, or setSize to silently wrap large values. This issue is fixed in versions 4.3.9 and 5.1.8. |
| internal-sftp in sshd in OpenSSH before 10.4 recognizes only the first 9 command-line arguments, which can be important if a later command-line argument would have helped to ensure the intended security properties of an SFTP connection. |
| vLLM is a high-throughput and memory-efficient inference and serving engine for LLMs. Prior to 0.24.0, a frontend-legal multi-request speculative decoding workload can cause the rejection sampler to produce a recovered token equal to the model vocabulary size boundary value, which is then converted to negative one when the engine selects the next live token for a request and is written back into the drafter's input ids; that out-of-vocabulary value is later consumed by the model's embedding and attention path and crashes the engine worker with a GPU device-side assertion. The same triggering request sequence is reachable through the public gRPC Generate and Abort endpoints, so a remote client that can send generation requests can crash the shared engine worker, aborting concurrent requests and causing a service-wide denial of service for other clients of the deployment until the worker is restarted. This issue is fixed in version 0.24.0. |
| FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, the PayPalEmail payment adapter accepts PayPal IPN callbacks and credits the IPN-supplied amount (`mc_gross`) to the client's balance without validating it against the invoice total. Combined with a $0.05 floating-point epsilon tolerance in the invoice credit-payment logic, this allows a client to underpay an invoice by up to $0.04 and still have it marked as fully paid. Version 0.8.0 patches the issue. There is no effective workaround without modifying the source code. Merchants using the PayPalEmail adapter should monitor IPN transactions for amounts that do not match their corresponding invoice totals, and manually review and refund suspicious payments. |
| An unauthenticated remote attacker can exhaust
server memory via the GetEndpoints Discovery Service in open62541. The
endpointUrl field of GetEndpointsRequest is not validated for length. An
attacker can declare an arbitrarily large string (up to ~4.09 GB via the UInt32
length field) delivered across intermediate chunks without ever sending the
final chunk. The server buffers all chunks in RAM indefinitely until the
SecureChannel times out. The attack is
pre-session and bypasses all encryption configurations.
The issue affects open62541: from 1.4.0 through 1.4.16, from 1.5.0 through 1.5.4, master. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Skip CSD when it has zeroed workgroups
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| Unauthenticated Arbitrary Code Execution in W3 Total Cache <= 2.9.4 versions. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of XMLTable-derived columns. |
| A data corruption vulnerability has been identified in the luksmeta utility when used with the LUKS1 disk encryption format. An attacker with the necessary permissions can exploit this flaw by writing a large amount of metadata to an encrypted device. The utility fails to correctly validate the available space, causing the metadata to overwrite and corrupt the user's encrypted data. This action leads to a permanent loss of the stored information. Devices using the LUKS formats other than LUKS1 are not affected by this issue. |
| Unauthenticated Multiple Vulnerabilities in BitFire Security <= 5.0.3 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in osdmap_decode()
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu. |
