| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect authorization validation in refresh token signature allows non-admin users to obtain a signed JFrog administrator token. |
| Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model. |
| Deck Mate 2's firmware update mechanism accepts packages without cryptographic signature verification, encrypts them with a single hard-coded AES key shared across devices, and uses a truncated HMAC for integrity validation. Attackers with access to the update interface - typically via the unit's USB update port - can craft or modify firmware packages to execute arbitrary code as root, allowing persistent compromise of the device's integrity and deck randomization process. Physical or on-premises access remains the most likely attack path, though network-exposed or telemetry-enabled deployments could theoretically allow remote exploitation if misconfigured. The vendor confirmed that firmware updates have been issued to correct these update-chain weaknesses and that USB update access has been disabled on affected units. |
| eGovFramework/egovframe-common-components versions up to and including 4.3.1 includes Web Editor image upload and related file delivery functionality that uses symmetric encryption to protect URL parameters, but exposes an encryption oracle that allows attackers to generate valid ciphertext for chosen values. The image upload endpoints /utl/wed/insertImage.do and /utl/wed/insertImageCk.do encrypt server-side paths, filenames, and MIME types and embed them directly into a download URL that is returned to the client. Because these same encrypted parameters are trusted by other endpoints, such as /utl/web/imageSrc.do and /cmm/fms/getImage.do, an unauthenticated attacker can abuse the upload functionality to obtain encrypted representations of attacker-chosen identifiers and then replay those ciphertext values to file-serving APIs. This design failure allows an attacker to bypass access controls that rely solely on the secrecy of encrypted parameters and retrieve arbitrary stored files that are otherwise expected to require an existing session or specific authorization context. KISA/KrCERT has identified this unpatched vulnerability as "KVE-2023-5281." |
| FileCodeBox before 2.4 contains a rate-limit bypass vulnerability in the IPRateLimit class that allows unauthenticated attackers to circumvent request throttling by supplying attacker-controlled X-Real-IP and X-Forwarded-For headers without verification of trusted reverse proxy origin. Attackers can supply unique spoofed IP values on each request to enumerate all possible share codes and retrieve other users' files without authentication. |
| Glance through 0.8.5 contains an IP address spoofing vulnerability in the authentication handler that allows unauthenticated attackers to bypass brute-force lockout protections by supplying arbitrary values in the X-Forwarded-For request header when the server proxied option is enabled. Attackers can manipulate the leftmost value of the X-Forwarded-For header to make each login attempt appear to originate from a distinct IP address, preventing the per-IP failed-login counter from reaching the lockout threshold and enabling unlimited credential guessing against the authentication endpoint. |
| A cross-origin issue was addressed with improved tracking of security origins. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may disclose sensitive user information. |
| In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, insufficient validation of the RRSIG.Labels field combined with premature cache writes during RFC 8198 aggressive NSEC processing leads to cache poisoning that permits a malicious actor controlling a single delegated zone to poison arbitrary sibling zones under NSEC-signed parent domains. A malicious actor with one registered domain under an NSEC-signed TLD can serve malicious insecure DNS responses for unrelated sibling domains (sharing the same parent zone). Arbitrary delegations that do not exist under the parent domain and are covered by the parent's NSEC chain can be brought into insecure existence by fraudulent wildcard DS records (less labels than expected, unknown algorithm) from the malicious sibling domain. This allows the malicious actor to inject insecure wildcard records for those delegations. |
| In NLnet Labs Unbound 1.6.2 up to and including 1.25.1, when Unbound is configured with the 'respip' module in front of the validator together with a 'response-ip' redirect rule or an RPZ file with an RPZ-IP trigger, the rewriting handler does not check the security status of the upstream answer and can instead rewrite a BOGUS A/AAAA answer to point to an operator's configured IP. If the validator finds an expired or otherwise invalid RRSIG on an answer whose A record falls within a 'response-ip'/RPZ configuration, the answer is still rewritten and given a hard coded security level of INSECURE. This results in the client receiving an INSECURE NOERROR reply rewritten by the operator's configured IP. A malicious actor can exploit the possible poisonous effect by spoofing a BOGUS A/AAAA answer that falls inside the operator's configured subnet rewrites. Such DNSSEC protected answers are then insecurely redirected to the operator's configured target. |
| In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, when an auth/rpz zone has a configured primary hostname that resolves to BOGUS A/AAAA, it is still considered as a possible XFR endpoint. A malicious actor that can spoof the hostname's A/AAAA record (no valid RRSIG required) becomes the zone's XFR primary and can replaces the entire zone/the resolver's entire response policy. |
| In NLnet Labs Unbound 1.4.22 up to and including 1.25.1, UDP source port is randomized and intended to serve as a secret value that increases the entropy of DNS transactions. When resolver load balancing policies depend on the source port while their outcome is revealed this secrecy is undermined. The vulnerability arises when the load balancing policy is consistent with respect to the incoming source UDP port and IP address while heavily depending on the incoming source UDP port as a randomization source. When the SO_REUSEPORT configuration option is enabled ('so-reuseport: yes') in Unbound (by default), it meets these conditions, making it vulnerable for DNS cache poisoning attacks. Upon startup, Unbound randomly partitions the available UDP source port space into disjoint subsets of (almost) equal size, assigning each subset to a specific worker thread. When an incoming DNS query is received, the kernel’s SO_REUSEPORT load balancing mechanism deterministically assigns the query to a socket associated with a particular thread. All outgoing DNS queries generated during the resolution of that request use source ports selected exclusively from the port subset assigned to the corresponding thread. Since these port subsets are disjoint across threads, the source port observed in a resolver’s outgoing query to an authoritative name server serves as a reliable indicator of the worker thread that processed the original client query. A malicious actor can acquire the mapping between incoming UDP source ports (for a given fixed source IP address) and Unbound worker threads and leverage it to conduct DNS cache poisoning attacks by effectively lowering the random port population per thread. |
| A flaw was found in the Event-Driven Ansible (EDA) server. The ExternalEventStreamViewSet uses permissive access controls (permission_classes=[AllowAny], authentication_classes=[]) and relies solely on the Subject HTTP header value for mTLS authentication without verifying that the header originated from a trusted proxy. Additionally, the expected certificate Distinguished Name is leaked in the 403 error response body. An attacker who can reach the EDA API endpoint with a spoofed Subject header can inject arbitrary events into mTLS-protected event streams, triggering downstream automation actions. |
| OIDC::Lite versions through 0.12.1 for Perl allow ID Token signature verification bypass via a token-controlled algorithm allowlist in verify.
When the caller does not pin an algorithm, OIDC::Lite::Model::IDToken::verify sets $self->alg($self->header->{alg}) from the token's own header and then calls decode_jwt(token, key, 1, [$self->alg]), handing JSON::WebToken an accepted-algorithm allowlist taken from the untrusted token. A token with alg=none yields ['none'], so decode_jwt returns the claims with no signature check, and a token with alg=HS256 is verified with the RP's RSA public key as the HMAC secret (RS to HS confusion).
The ID Token is the OpenID Connect authentication assertion delivered to the Relying Party. Any caller that verifies an ID Token through the unpinned load(token)->verify path, or load(token, key) with only the key pinned, accepts a forged token carrying attacker-chosen claims such as sub and is authenticated as any user. Passing an explicit algorithm so $self->alg is already set bypasses the header-derived allowlist and is not affected.
Note that the latest version uploaded to CPAN is 0.10. Later versions are available in the git repository. |
| Origin validation error in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform spoofing over a network. |
| SigNoz before 0.134.0 contains an open redirect vulnerability in the SSO authentication flow that allows unauthenticated attackers to steal session tokens from any user on instances configured with Google OAuth, SAML, or OIDC. Attackers can call the unauthenticated sessions context endpoint with a ref parameter pointing to an attacker-controlled host, deliver the resulting crafted login URL to a victim, and receive the victim's access and refresh tokens when they complete SSO authentication. |
| Logto bypasses OIDC nonce validation when the nonce claim is absent from the id_token, enabling replay of authentication tokens and weakening session-binding. |
| Site isolation issue in the Graphics component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Logto omits validation of the SAML <Conditions> element, enabling attackers to strip time and audience restrictions and replay assertions indefinitely. |
| Multiple Lenze products are affected by an improper signature verification vulnerability in the SSH enablement mechanism. A low-privileged local attacker can bypass verification of the SSH enable file signature and enable SSH access on the device. Successful exploitation may result in unauthorized administrative access and complete system compromise. |
| Symfony is a PHP framework for web and console applications and a set of reusable PHP components. Prior to 6.4.40, 7.4.12, and 8.0.12, OidcTokenHandler::verifyClaims() registered audience (aud), issuer (iss), and expiry (exp) checkers but did not pass the mandatory claims list to ClaimCheckerManager::check(), so a validly signed JWT that omitted those claims could pass verification. This issue is fixed in versions 6.4.40, 7.4.12, and 8.0.12. |
